Black Box 3600 MODEM manual Dial Parameters, Bis Commands and Responses, Parameters Function

V.25 bis Autodialer

3) Any parameter containing too many characters.

INVPVThis message has one of three possible meanings:

1)Any parameter set containing invalid characters

2)Any parameter or parameter set containing no valid (only ignored) characters

3)Any parameter set containing an out-of-range parameter

Dial Parameters

Table 11-1 lists and describes the parameters used in autodialing. The memory available for dialing can hold up to 40 characters. Parameters inserted for readability are not counted.

Parameters	Function
0 thru 9	DTMF and pulse digit
* and #	DTMF digit
W	Wait for 2nd type of dial tone
>	Pause for 1 second
=	Pause for 3 seconds
<	Pause for programmed delay time
P	Pulse dialing
T	Tone dialing
&	Flash (go on hook) for ½ second
;	PARM separator
Space, dash,	Parameters inserted for readability
parenthesis, period

V.25 bis Commands and Responses

The following sections describe the commands used with the V.25 bis autodialer and explain the responses received when each command is executed.

11-4 Modem 3600