Black Box 3600 manual Binary File Transfer, Class 1 Result Code +FCERROR, Fax Autoanswer +FAA=

Fax Operation

Class 1 Result Code +FCERROR

If the modem detects any carrier or tone that differs from that specified in a +FRM or +FRH command, it sends the +FCERROR result code and returns to command state, allowing the DTE to attempt a recovery. The numeric form of this response is +F4.

Fax Autoanswer +FAA=

The modem can be set up to automatically detect if a fax or data call is being answered. The command +FAA=1 enables this function and +FAA=0 disables it. This feature requires special support by the fax software package.

Command	Description
+FAA=0	Disable fax autoanswer
+FAA=1	Enable fax autoanswer

DTE Autobaud for Fax Autoanswer *FR

Set the fax autoanswer feature to autobaud at 19.2 kbps or greater, if desired.

Command	Description
*FR	Forced to > = 19,200 bps
*FR1	Forced to = 19,200 bps
*FR?	Display this option’s current status

Binary File Transfer

Some Class 1 software packages may provide an option for transferring files between computers with fax modems, using a Binary File Transfer (BFT) standard. Although the received file is not a fax image, transmitting the file is similar to sending a fax. Since the modem allows T.30 error correction mode (with HDLC framing up to 9600 bps), fax mode can also be used for BFT if supported by the Class 1 software package. The Binary File Transfer is an option in the fax software package, not a separate mode of operation.

9-10 Modem 3600