Zebra Technologies 3ULQWHUV manual $73, Default Web, 6162573, Selections Web, mark

Appendixes

Front Panel Controls

3UHVV	/&'	'HVFULSWLRQ
		Setting Media Type: Press either black oval to
		display choices.
		Default: Continuous
		Selections: Continuous, non-continuous
	0(',$￿7<3(	This parameter tells the printer the type of media you
		are using. Selecting continuous media requires that
		you include a label length instruction in your label
		format (^LLxxxx if you are using ZPL or ZPL II).
		When non-continuous media is selected, the printer
		feeds media to calculate label length (the distance
		between two recognized registration points of the
		inter-label gap, webbing, or alignment notch or
		hole).
		Setting the Sensor Type: Press either black oval to
		display other choices.
		Default: Web
	6(1625￿7<3(	Selections: Web, mark
		This parameter tells the printer whether you are
		using media with a web (gap/space between labels,
		notch, or hole) to indicate the separations between
		labels or if you are using media with a black mark
		printed on the back. If your media does not have
		black marks for registration on the back, leave your
		printer at the default (web).

Zebra XiIIIPlus Users Guide 61