Zebra Technologies 3ULQWHUV manual ZPL II Programming Guide

Appendixes

Front Panel Controls

3UHVV	/&'	'HVFULSWLRQ
		Backfeed Sequence: Press the right or left black
		oval to display other choices.
		Default: Default (90%)
		Selections: Default, after, before, 10%, 20%, 30%,
		40%, 50%,
	%$&.)(('	60%, 70%, 80%, off
		This parameter establishes when and how much label
		backfeed occurs after a label is removed or cut in
		Peel-Off, Cutter, and Applicator Modes. It has no
		effect in Rewind or Tear-Off Modes. This parameter
		setting can be superseded by the ~JS instruction
		when received as part of a label format (see the
		ZPL II Programming Guide).
		Note • The difference between the value entered and
		100% establishes how much backfeed occurs before
		the next label prints. For example, a value of 40
		means that 40% of the backfeed takes place after the
		label is removed or cut. The remaining 60% takes
		place before the next label prints. A value of %()25(
		means that all backfeed takes place before the next
		label prints.
		Adjusting Label Top Position: The displayed value
		represents dots.
	/$%(/￿723	‡￿To increase the value, press the right black oval.
		‡￿To decrease the value, press the left black oval.
		Default: +0
		Range: –120 to +120 dot rows
		The label top position adjusts the print position
		vertically on the label. Positive numbers adjust the
		label top position further down the label (away from
		the printhead), negative numbers adjust the position
		up the label (toward the printhead).

Zebra XiIIIPlus Users Guide 79