Zebra Technologies 3ULQWHUV manual Start Print Signal Press the right or left black oval

Appendixes

Front Panel Controls

3UHVV	/&'	'HVFULSWLRQ
		Start Print Signal: Press the right or left black oval
		to display other choices.
	67$57￿35,17￿	Default: Pulse Mode
	6,*	Selections: Pulse Mode, Level Mode
		This parameter determines how the printer reacts to
		the Start Print Signal input on pin 3 of the applicator
		interface connector at the rear of the printer.
		‡￿In Pulse Mode, labels print when the signal transi-
		tions from HIGH to LOW.
		‡￿In Level Mode, labels print as long as the signal is
		asserted LOW.
		Caution • Start Print Signal is set by the applicator
		manufacturer and should not be changed unless the
		factory defaults have been reloaded. The printer must
		be returned to its designated setting for it to work
		properly.

84 Zebra XiIIIPlus Users Guide