Zebra Technologies 3ULQWHUV manual 5LEERQ6SHFLILFDWLRQVE\0RGHO

Appendixes

Specifications and Care

5LEERQ￿6SHFLILFDWLRQV￿E\￿0RGHO

Note • Match the ribbon to the label width and printhead width you are using.

‡Ribbon must be wound with the coated side out.

‡Ribbon should be at least as wide as the labels to protect the printhead from excessive wear.

￿￿￿;L,,,3OXV

6SHFLILFDWLRQV	￿￿￿;LIII3OXV￿
	￿￿￿
Printhead	203 dots/inch
resolution	(8 dots/mm)
Ribbon width	0.79 in. (20 mm)
Minimum
Ribbon width	￿4.33 in. (110 mm)
Maximum
Standard length	984 ft. (300 m)
with 2:1 label to
ribbon ratio
Standard length	1476 ft. (450 m)
with 3:1 label to
ribbon ratio
Ribbon core	1.0 in. (25.4 mm)
inside diameter
Maximum ribbon	3.2 in. (81.3 mm)
roll outside
diameter

￿￿￿;LIII3OXV￿

￿￿￿

300dots/inch

(12 dots/mm)

0.79in. (20 mm)

￿4.33 in. (110 mm)

984 ft. (300 m)

1476 ft. (450 m)

1.0in. (25.4 mm)

3.2in. (81.3 mm)

￿￿￿;LIII3OXV￿

￿￿￿

600dots/inch

(24 dots/mm)

0.79in. (20 mm)

￿3.40 in. (87 mm)

984 ft. (300 m)

1476 ft. (450 m)

1.0in. (25.4 mm)

3.2in. (81.3 mm)

Zebra XiIIIPlus Users Guide 101