Zebra Technologies 3ULQWHUV manual Control Prefix Character, Range 00-FF, Format Prefix Character

Appendixes

Front Panel Controls

3UHVV	/&'	'HVFULSWLRQ
		Control Prefix Character:
	&21752/￿	1. Press the left black oval to move to the next digit
		position.
	35(),;	2. Press the right black oval to increase the value of
		the digit.
		Default: 7E (tilde—displayed as a black square)
		Range: 00–FF
		The printer looks for this two-digit hex character to
		indicate the start of a ZPL/ZPL II control instruction.
		Note • Do not use the same hex value for the
		control, format, and delimiter character. The printer
		must see different characters to work properly.
		Format Prefix Character:
	)250$7￿	1. Press the left black oval to move to the next digit
		position.
	35(),;	2. Press the right black oval to increase the value of
		the digit.
		Default: 5E (caret)
		Range: 00–FF
		The format prefix is a two-digit hex value used as a
		parameter place marker in ZPL/ZPL II format
		instructions. The printer looks for this 2-digit hex
		character to indicate the start of a ZPL/ZPL II format
		instruction. See the ZPL II Programming Guide
		Volume I for more information.
		Note • Do not use the same hex value for the
		control, format, and delimiter character. The printer
		must see different characters to work properly.

76 Zebra XiIIIPlus Users Guide