![](/images/new-backgrounds/1266153/26615393x1.webp)
Labels and Print Modes
Print Mode Choices
The callouts in the illustration and the following table identify the parts of the printer and rewind plate.
| 1 |
4 | 2 |
| 3 |
&DOORXW | 'HVFULSWLRQ |
Rewind plate | |
Lip | |
Adjustable hook plate | |
Slots |
2.Position the rewind plate so the lip on the attached hook plate points down.
3.Insert the hook plate lip a short distance (1/2 in. or 13 mm) into the lower opening in the side plate.
4.Align the upper end of the rewind plate with the matching opening in the side plate.
5.Slide in the rewind plate until it stops against the printer’s main frame.
6.Open the printhead.
7.Slide the media guide and media supply guide as far from the printer frame as possible. Flip down the media supply guide.
Zebra XiIIIPlus Users Guide | 27 |