Zebra Technologies 3ULQWHUV manual Default Feed Mode

Appendixes

Front Panel Controls

3UHVV	/&'	'HVFULSWLRQ
		Resynch Mode: Press the right or left black oval to
		display other choices.
		Default: Feed Mode
		Selections: Feed Mode, Error Mode
	5(6<1&+￿02'(	This parameter determines how the printer reacts if
		the label synchronization is lost and the label top is
		not where expected.
		Feed Mode—If the label top is not where expected,
		the printer feeds a blank label to find the label top
		position.
		Error Mode—If the label top is not where expected,
		the printer stops, enters PAUSE Mode, displays the
		message (UURU￿&RQGLWLRQ￿)HHG￿/DEHO, flashes
		the ERROR LED, and asserts the Service Required
		signal (pin 10 on the Applicator Interface
		Connector).
		To resynch the media to the top of the label in Error
		Mode:
		1. Press PAUSE to exit Pause Mode.
		The ERROR LED stops flashing and the Service
		Required signal is deactivated. The action of the
		printer is determined by the +HDG￿&ORVH
		configuration selection:
		&$/,%5$7,21—determines the length of the
		label.
		)(('—feeds the labels to the first registration
		point.
		/(1*7+—used in continuous mode to feed the last
		stored label length.
		12￿027,21—the media does not move.
		2. You must press FEED to cause the printer to
		resynch to the start of the next label if 12￿
		027,21￿is selected.

Zebra XiIIIPlus Users Guide 85