Printer Setup and Calibration
Before You Begin
The callout in the illustration below and the table that follows show the lower media sensor.
| 1 |
&DOORXW | 'HVFULSWLRQ |
Lower media sensor |
6.Position the lower media sensor by sliding it in its slot until it is directly under the upper media sensor
7RDGMXVWWKHEODFNPDUNVHQVRU
The black mark sensor is in a fixed position and set from the front panel. Refer to Front Panel Controls on page 54 for instructions.
22 | Zebra XiIIIPlus Users Guide |
