Appendixes
Specifications and Care
;L,,,3OXVDQG;L,,,3OXV%ODFN0DUN6HQVLQJ2QO\
6SHFLILFDWLRQV | ;L,,,3OXV | ;L,,,3OXV | ;L,,,3OXV | |
|
|
|
| |
Mark length | 0.12 in. (3 mm) Φ | 0.12 in. (3 mm) Φ | 0.12 in. (3 mm) Φ | |
(measuring parallel | 0.43 in. (11 mm) ϑ | 0.43 in. (11 mm) ϑ | 0.43 in. (11 mm) ϑ | |
to label or tag | ||||
|
|
| ||
edge) |
|
|
| |
Mark width | 0.43 in. (11 mm) Φ | 0.43 in. (11 mm) Φ | 0.43 in. (11 mm) Φ | |
(measuring to | Full media width ϑ Full media width ϑ Full media width ϑ | |||
perpendicular | ||||
|
|
| ||
label/tag edge) |
|
|
| |
Mark location | Marks must be | Marks must be | Marks must be | |
| located within | located within | located within | |
| 0.040 in. (1 mm) of | 0.040 in. (1 mm) of | 0.040 in. (1 mm) of | |
| the inside media | the inside media | the inside media | |
| edge. | edge. | edge. | |
Mark density in | >1.0 | >1.0 | >1.0 | |
Optical Density |
|
|
| |
Unit (ODU) |
|
|
| |
|
|
|
| |
3RZHU&RUG6SHFLILFDWLRQV
Your power cord must meed these standards:
‡The overall length must be less than 9.8 ft. (3.0 m).
‡It must be rated for at least 5 A, 250 V.
‡The chassis ground (earth) must be connected to ensure safety and reduce electromagnetic interference.
The ground connection is handled by the third wire (earth) in the power cord as shown in the illustration callouts and table below.
110 | Zebra XiIIIPlus Users Guide |
