Zebra Technologies 3ULQWHUV manual 3DVVZRUG3URWHFWHG3DUDPHWHUV, 350$117, 70325$5, $$8/76, $/$676$9

Appendixes

Front Panel Controls

.

/&'￿'LVSOD\	'HVFULSWLRQ
3(50$1(17	Permanently saves the changes. Values are stored in the
	printer even when power is turned off.
7(0325$5<	Saves the changes until you change them again or until
	power is turned off.
&$1&(/	Cancels all changes from the time you pressed SETUP/
	EXIT except the darkness and tear-off settings (if they
	were changed).
/2$'￿'()$8/76	Loads the factory defaults. The factory defaults are shown
	on the following pages.
/2$'￿/$67￿6$9(	Loads values from the last permanent save.

Note • Loading factory defaults causes the printer to auto-calibrate.

3DVVZRUG￿3URWHFWHG￿3DUDPHWHUV

Certain parameters are password-protected by factory default, including the communication parameters.

Note • If the parameters are set incorrectly, the printer function may be unpredictable.

The first attempt to change one of these parameters (pressing one of the black ovals) requires you to enter a four-digit password at the (17(5￿3$66:25' display. The left black oval changes the selected digit position; the right black oval increases the selected digit value. After entering the password, press NEXT/SAVE. The parameter you wish to change is displayed. If the password was entered correctly, you can now change the value.

Zebra XiIIIPlus Users Guide 55