Zebra Technologies 3ULQWHUV Setting Host Handshake Press the right or left, Default XON/XOFF

Appendixes

Front Panel Controls

3UHVV	/&'	'HVFULSWLRQ
		Setting Host Handshake: Press the right or left
		black oval to display other choices.
		Default: XON/XOFF
	+267￿	Selections: XON/XOFF, RTS/CTS, DTR/DSR
	+$1'6+$.(	The handshake protocol of the printer must match
		the handshake protocol of the host computer for
		proper communications to take place. Select the
		handshake protocol that matches the one being used
		by the host computer.
		Setting Protocol: Press the right or left black oval to
		display other choices.
		Default: None
		Selections: None, Zebra, ACK/NACK
	35272&2/￿	Protocol is a type of error checking system.
		Depending on the selection, an indicator may be sent
		from the printer to the host computer signifying that
		data has been received. Select the protocol that is
		requested by the host computer. Further details on
		protocol can be found in the ZPL II Programming
		Guide.
		Note • Zebra is the same as ACK/NACK, except
		that Zebra response messages are sequenced. If
		Zebra is selected, printer must use DTR/DSR host
		handshake protocol.

Zebra XiIIIPlus Users Guide 73