Zebra Technologies 3ULQWHUV manual Delimiter Character, Default ZPL, Selections ZPL II, ZPL

Appendixes

Front Panel Controls

3UHVV	/&'	'HVFULSWLRQ
		Delimiter Character:
		1. Press the left black oval to move to the next digit
	'(/,0,7(5￿	position.
		2. Press the right black oval to increase the value of
	&+$5
		the digit.
		Default: 2C (comma)
		Range: 00–FF
		The delimiter character is a 2-digit hex value used as
		a parameter place marker in ZPL/ZPL II format
		instructions. See the ZPL II Programming Guide
		Volume I for more information.
		Note • Do not use the same hex value for the
		control, format, and delimiter character. The printer
		must see different characters to work properly.
		Selecting ZPL Mode: Press the right or left black
		oval to display other choices.
	=3/￿02'(	Default: ZPL II
		Selections: ZPL II, ZPL
		The printer remains in the selected mode until it is
		changed by this front panel instruction or by using a
		ZPL/ZPL II command. The printer accepts label
		formats written in either ZPL or ZPL II. This
		eliminates the need to rewrite any ZPL formats you
		already have. See the ZPL II Programming Guide for
		more information on the differences between ZPL
		and ZPL II.

Zebra XiIIIPlus Users Guide 77