Zebra Technologies 3ULQWHUV manual Setting Parallel Communications Press the right, Default RS-232

Appendixes

Front Panel Controls

3UHVV	/&'	'HVFULSWLRQ
		When 5(/2$'￿$// is displayed:
—	5(/2$'￿$//	1. Open the printhead and pull the media forward
		until a label is positioned under the media sensor.
		2. Reload the ribbon back into to its proper position.
		3. Close the printhead.
		4. Press the right black oval to continue.
	0(',$￿$1'￿	The printer does a calibration equivalent to pressing
		CALIBRATE; during this process, the printer
	5,%%21￿	determines the label length. The process is now
	&$/,%5$7(
		complete. To see the new readings on the new scale,
		print a sensor profile.
		Setting Parallel Communications: Press the right
		or left black oval to display other choices.
	3$5$//(/￿	Default: Bidirectional
	&200	Selections: Bidirectional, unidirectional, or Twinax/
		coax
		Select the communications port that matches the one
		being used by the host computer.
		Setting Serial Communications: Press the right or
		left black oval to display other choices.
	6(5,$/￿&200	Default: RS-232
		Selections: RS-232, RS-422/485, RS-485 multidrop
		Select the communications port that matches the one
		being used by the host computer.

Zebra XiIIIPlus Users Guide 71