Zebra Technologies 3ULQWHUV manual 3ULQW4XDOLW\3UREOHPV, 2XWRI0HPRU

Appendixes

Troubleshooting

2XW￿RI￿0HPRU\

&DXVH

There is not enough memory to perform the function shown on the second line of the error message.

6ROXWLRQ

‡￿Shut off the printer to clear memory and try to print again.

‡￿If the error recurs, there is insufficient memory for the label length, downloaded fonts or graphics, and images.

‡￿Ensure that the device, such as Flash memory or PCMCIA card, is installed and not write-protected or full.

‡￿Ensure that the data is not directed to a device that is not installed or available.

3ULQW￿4XDOLW\￿3UREOHPV

*HQHUDO￿3ULQW￿4XDOLW\￿,VVXHV

&DXVH 6ROXWLRQ

You are using an incorrect labels and ribbon combination for your application.

The printer is set at the incorrect print speed.

The printer is set at the incorrect darkness level.

Consult your authorized Zebra reseller ordistributor for information and advice.

For optimal print quality, set the print speed to the lowest possible setting via ZPL II, the driver, or the software.

For optimal print quality, set the darkness to the lowest possible setting via the front panel, the driver, or the software.

Zebra XiIIIPlus Users Guide 127