Zebra Technologies 3ULQWHUV manual URQW3DQHO&RQWUROV, QWHU6HWXS0RGH, HDYH6HWXS0RGH

Appendixes

Front Panel Controls

)URQW￿3DQHO￿&RQWUROV

After you have installed the labels and ribbon and printed a configuration label, you can change your XiIIIPlus printer settings using the front panel controls. Basic information about using the front panel controls is included in this appendix. See Front Panel Lights on page 57, and Troubleshooting on page 120 for detailed information on the printer menu and on solving printing problems.

After the Power-On Self Test (POST) is complete, the LCD shows 35,17(5￿5($'<.

Note • Printers that are operating on an IP network can be quickly configured with

the ZebraLink™ WebView (ZebraNet® PrintServer II required). For information, see ZebraNet Networking: PrintServer II Installation and User’s Guide.

(QWHU￿6HWXS￿0RGH

Press SETUP/EXIT to enter Setup Mode. Press either NEXT/SAVE or PREVIOUS to scroll to the parameter you wish to set.

Parameters are shown in the order displayed when pressing NEXT/SAVE. Throughout this process, press NEXT/SAVE to continue to the next parameter, or press PREVIOUS to return to the previous parameter in the cycle.

/HDYH￿6HWXS￿0RGH￿

Note • If you need to restore the printer to its factory default settings, see FEED and PAUSE Self Test on page 136.

You can leave Setup Mode at any time by pressing SETUP/EXIT. The

6$9( &+$1*(6￿display appears. Pressing the left or right black oval displays other choices and pressing NEXT/SAVE selects the displayed choice.

The five menu choices are described in the table below.

54 Zebra XiIIIPlus Users Guide