Zebra Technologies 3ULQWHUV Selecting the Display Language Press the right or, Default English

Appendixes

3UHVV /&' ([SODQDWLRQ

		Selecting the Display Language: Press the right or
		left black oval to display other choices.
	/$1*8$*(	Default: English
		Selections: English, Spanish, French, German,
		Italian, Norwegian, Portuguese, Swedish, Danish,
		Spanish 2, Dutch, Finnish, Japanese
		This parameter allows you to change the language
		used on the LCD.
You have now completed the entire configuration and calibration sequence.
		Save Changes: Press the right or left black oval to
	6$9(￿&+$1*(6	display other choices.
		Default: Permanent
		Selections:
		Permanent: Permanently saves the changes, even
		when printer power is turned off.
		Temporary: Saves the changes until changed
		again or until power is turned off.
		Cancel: Cancels all changes since you entered the
		setup mode except for darkness and tear-off
		position (if they were changed).
		Load defaults: Loads factory defaults.
		Note • Loading factory defaults requires
		calibration.
		Load last save: Loads the values from the last
		permanent save.
	6$9,1*￿	Save option selected.
	&+$1*(6
—	35,17(5￿5($'<	The configuration and calibration sequence is done.
		The printer is ready for normal printer operation.

Zebra XiIIIPlus Users Guide 91