Zebra Technologies 3ULQWHUV manual 6HULDOSLQFRQILJXUDWLRQ, 1DPH Hvfulswlrq

Data Ports

Standard Ports

6HULDO￿SLQ￿FRQILJXUDWLRQ

The table below shows the pin configuration and function of the rear panel serial data connector on the printer.

3LQ￿1R￿

1DPH

'HVFULSWLRQ

1	—	Not connected
2	RXD	Receive data—data input to printer
3	TXD	Transmit data—data output from printer
4	DTR	Data terminal ready—output from printer
5	SG	Signal ground
6	DSR	Data set ready—input to printer
7	RTS	Request to send—output from printer
8	CTS	Clear to send—input to printer

9+5 +5 VDC signal output

VDC

Note • This pin is also available as a +5 VDC power

source at 750 mA. The maximum current draw may be limited by option configuration. To enable this capability, a jumper on the computer’s main logic board needs to be installed on JP1, pins 2 and 3.

Note • An interface module is required for RS-422/RS-485 interface support (see RS-422/RS-485 Interconnections on page 45).

Zebra XiIIIPlus Users Guide 41