Zebra Technologies 3ULQWHUV manual 86%3RUW

Data Ports

Standard Ports

56￿￿￿￿￿56￿￿￿￿￿,QWHUFRQQHFWLRQV

Caution • A qualified service technician must install a jumper on the main logic board at JP1, Pins 2 and 3 for the RS-422/RS-485 interface adapter to function properly.

An interface adapter (Zebra part number 33130) is required to connect the printer’s RS-232 DB-9 interface to a host computer through an RS-422 or RS-485 interface. A generic DB-25 adapter can be used.

This illustration shows the cable wiring for interconnecting the DB-9 to the interface adapter’s DB-25 female connector.

Female DB-25 Connector on

RS-422/RS-485 Adapter

Frame ground	1
+5 VDC 725 mA source	9
Signal ground ref.	11
Data input B (–)	13
Data output B (–)	14
Data input A (+)	16
Data output A (+)	19

NOTE: Pins 2–8, 10, 12, 15, 17, 18, and 20–25 are unused and unterminated.

86%￿￿￿￿￿3RUW

In addition to serial and parallel data ports, a USB 2.0 port (which is USB 1.1- and 1.0- compatible) is available to connect your printer to the host equipment.

Zebra XiIIIPlus Users Guide 45