Printer Setup and Calibration
Before You Begin
7RORDGWKHODEHOVFRPSOHWHWKHVHVWHSV
1.Open the printhead.
This illustration calls out the parts of the printer used when loading the labels.
&DOORXW
'HVFULSWLRQ
Printhead lever in open position.
Media Guide
Media back plate
Optional media spindle (media hanger standard)
2.Slide the media guide away from the printer frame. You may need to loosen the media guide screw.
3.Put the roll of labels on the media hanger. (Optional media spindle is shown.)
4.Push the label core toward the printer frame. The labels must be aligned with the label core.
Zebra XiIIIPlus Users Guide | 11 |