Zebra Technologies 3ULQWHUV manual 7RDGMXVWSULQWKHDGSUHVVXUHFRPSOHWHWKHVHVWHSV

Appendixes

Troubleshooting

7R￿DGMXVW￿SULQWKHDG￿SUHVVXUH￿￿FRPSOHWH￿WKHVH￿VWHSV￿

Note • Printhead life can be maximized by using the lowest pressure that produces the desired print quality.

1.Print some labels at 2.4 in. (61 mm) per second by running the PAUSE Self Test described in To perform a PAUSE self test, complete these steps: on page 134.

2.While printing labels, lower the darkness setting using the front panel controls until a gray level of printing is seen.

3.Loosen the adjusting nuts at the top of the toggle assemblies.

4.The 90XiIIIPlus and 96XiIIIPlus printers have only one toggle.Loosen the adjusting nuts at the top of the toggle assemblies.

	1
&DOORXW	'HVFULSWLRQ
￿	Adjusting nuts

7R￿DGMXVW￿SULQWKHDG￿SUHVVXUH￿IRU￿VSHFLDOL]HG￿ODEHOV￿￿FRPSOHWH￿ WKHVH￿VWHSV￿

1.For label types that require higher pressure to print well, increase the pressure using the adjusting nuts at the top of the toggle assemblies.

2.Increase the darkness level using the front panel controls until the printing is clear.

3.Tighten the knurled adjusting nuts.

Zebra XiIIIPlus Users Guide 121