Technicolor - Thomson RT2350BK Operating your Receiver, Using the receiver to play a source, Hint

Operating your Receiver

NOTE

Once your remote is encoded, you can press ON/OFF on the remote once to turn off the component and then followed by the second time quickly to turn off the receiver (i.e. this unit). If you only want the receiver to be turned off, select FM/ AM while the unit is ON before pressing ON/OFF.

HINT

This remote may not operate all models of the brands shown.

If batteries are removed from the battery compartment of the remote control, all mem- ory will be lost. You need to re-enter all previously programmed codes again.

The buttons on the remote may not work correspondingly with those on other brand components. Experiment with the remote and your components to see which buttons work. If only a few functions operate, check to see if another code set will work with more but- tons.

Using the receiver to play a source

EN

After having properly connected a source (DVD, CD, VCR) to the receiver, you can partly control them through the receiver.

Playing a DVD with the receiver

1.Connect a DVD player to the receiver (see connect- ing your receiver for details)

NOTE

To play Dolby Digital or DTS sound, the source must be connected to the receiver via the opti- cal or coaxial terminal

2.Press ON/STANDBY to switch on the receiver

3.Select the DVD source.

4.Switch ON the DVD player and start playback

5.Switch ON your TV

6.Select the appropriate A/V channel on the TV (refer to your TV manual for details) until the image from the DVD player is displayed

7.Set the sound Mode if needed (see "Advanced sound control" for details)

Example 1:

To play 5.1 Dolby Digital surround sound

Press SURR. MODE button until "Dolby Digital" appears on the Display and all of the speaker'’ icons light up.

Example 2:

DVD: You may also need to select the Dolby Digital

5.1on the DVD disc menu to have the digital sur- round enabled providing that the disc is encoded with Dolby Digital 5.1 (please refer to the DVD player and DVD disc instruction)

Example 3:

LD: You may need to select a different Audio Channel on your LD (refer to your LD player manu- al)

8. Adjust volume knob accordingly

15