Using the Quick Lock Lever

The work vise is equipped with a threaded screw clamp and handle for tightening the vise. The clamp is also equipped with a quick lock release mechanism as standard equipment. The clamp can be tightened against the workpiece in the vise by turning the han- dle clockwise and loosened by turning the handle counterclockwise. To use the quick lock release mechanism, follow the steps below. See Figure 8.

ATTACHING THE REAR SPARK SHIELD

1. Place the spring washer over the hex bolt followed by the flat washer and then fit the hex bolt through the spark deflector. Place the spark shield in the correct position and tighten the hex bolt.

2. Tighten the hex bolt to secure the spark shield in position

1.Release the tension on the screw clamp by turning the handle counterclockwise for 1/2 to 1 full turn.

2.Lift the quick lock lever up and pull back the screw clamp handle sliding the vise open.

3.To tighten, lift the quick lock lever

up and push the screw clamp for- ward against the workpiece.

4.Push the quick lock lever down into release mechanism.

5.Turn the screw clamp clockwise to securely tighten the workpiece in the vise.

FIGURE 8. USING THE QUICK LOCK LEVER

FIGURE 10. ATTACHING

THE REAR SPARK SHEILD

OPERATING INSTRUCTIONS FOR THE CUT-OFF SAW

Do not use the Cut-off saw if the power cord (or exten- sion cord, if used) is worn, cut, or damaged in any other way. A worn or dam- aged power cord must be replaced immediately. Contact Alltrade Customer Service to obtain the proper replacement power cord. Failure to adhere to this warning could result in damage to the Cut-off saw motor, fire, or severe

ATTACHING THE VICE HANDLE

electrical shock or even death to the operator.

FIGURE 9. ATTACHING

THE VISE HANDLE

1.Fit the vice handle onto the end of the vice.

2.Fit the spring washer over the hex screw followed by the flat washer.

3.Place the hex screw inside the vice handle and secure the vice handle to the vice by tightening the hex screw in a clockwise direction.

4.Fit the cap onto the vice handle.

SECURING THE TRIGGER SWITCH

The 14" Cut-off saw should always be protected against unauthorized usage. Follow the steps below to secure the Cut-off saw when not in use.

FIGURE 11. SECURING THE

TRIGGER SWITCH

691204 specifications

The Kawasaki 691204 is a powerful engine designed for a variety of heavy-duty applications, specifically in the domain of outdoor power equipment. This engine exemplifies Kawasaki’s commitment to performance, reliability, and advanced technology, making it a preferred choice for both commercial and residential users.

One of the main features of the Kawasaki 691204 is its impressive horsepower output, which is optimized for tasks requiring significant power such as lawn care, landscaping, and industrial applications. Its robust design allows it to handle even the toughest jobs with efficiency, ensuring that users achieve their desired outcomes without prolonged downtime.

The Kawasaki 691204 incorporates cutting-edge technology, including an overhead valve (OHV) design. This feature not only improves the engine's overall efficiency but also enhances its torque curve, allowing for better performance at various operating speeds. The OHV configuration also contributes to lower emissions, aligning the engine with modern environmental standards and regulations, making it an eco-friendly option without compromising power.

Another significant characteristic of the Kawasaki 691204 is its exceptional durability. Constructed from high-quality materials, this engine is built to withstand demanding conditions and extended use. The engine’s enhanced cooling system ensures optimal operating temperatures, reducing the risk of overheating and prolonging its lifespan. Moreover, the 691204 is designed for easy maintenance, featuring accessible components that streamline servicing tasks, thus enhancing user convenience.

Furthermore, the Kawasaki 691204 is known for its smooth operation. Thanks to the advanced balancing technology integrated into the engine, vibrations are minimized, resulting in a more comfortable user experience. This is particularly important for extended usage, as it reduces fatigue and increases productivity.

In summary, the Kawasaki 691204 is an outstanding engine characterized by its power, efficiency, and durability. Equipped with advanced technologies such as the OHV design and a high-performance cooling system, it meets the demands of both commercial and residential users alike. With its user-friendly maintenance features and smooth operation, the Kawasaki 691204 stands out as a reliable choice for those seeking a high-performance engine to tackle a wide variety of outdoor power equipment tasks.

Kawasaki 691204 instruction manual Using the Quick Lock Lever, Attaching the Rear Spark Shield

Models: 691204