Operating your Receiver
Operating the Radio
The receiver has a
Manual tuning
1.Connect the FM and AM antenna accordingly (see "Connecting the Antenna" on page 5 section for details)
2.Press ON/STANDBY to switch on the receiver.
5- Tune the stations by pressing TUNING UP or DOWN repeatedly until the desired station is found. Alternatively, you can press and hold TUNING UP or DOWN for about one second to activate the automatic SEARCH function. In this mode the receiver will automatically tune frequencies until it finds a station
RCE
FM/AM TUNING MEMORY
RCE
ON/STANDBY | NOTE |
| |
MUTE |
|
| 1. If there is interference, modify the location |
3. Press SOURCE keys to enter TUNER mode. | of the antenna until the optimal sound is heard. |
| TV and other electronic devices could be the |
| cause of interferences so try to position the |
| antenna away from them. |
SOURCE |
| 2. Weak signal can affect the "auto Search |
FM/AM | TUNIN | |
SOURCE |
| function". Adjust the antenna for better recep- |
|
| tion for more efficient search. |
|
| Select sound effect if needed by pressing Preset EQ or |
|
| DSP sound (see "Advance sound section" for details). |
4- To select band, press the FM/AM button to toggle between AM/FM mode.
Selecting Mono or Stereo Sound
SOURCE |
|
|
FM/AM | TUNING | MEM |
SOURCE |
|
|
Press ST/MONO on the main unit or the DIGITAL button on the remote control to toggle between mono and stereo sound in FM tuner mode (when available).
SURR MODE
SETUP TEST TONE EQ DIGITAL INPUT
DSP MODE
ST / MONO
BA
V
16
