Operating Your Receiver
Switching on/off
•To switch on the receiver, press ON/STANDBY button once, or any source button on the remote control.
Selection of Audio/Video source
When one of the source buttons is pressed, the audio EN and video input corresponding to the name will be activated.
The receiver acts as a switching device between all the sources that are plugged into it.
ON/STANDBY
•Standby: when the receiver is on, press the ON/STANDBY button once to activate the standby mode.
•To switch off the unit completely, unplug the power cord from the socket
SOURCE |
|
FM/AM | TUN |
SOURCE |
|
Example 1:
If you connect a DVD player to the DVD input (audio + video) on the receiver and press the DVD button, or press source button repeatedly until DVD is selected, you will be able to have the sound and image transmitted by the DVD.
SOURCE |
|
FM/AM | TUNIN |
SOURCE |
|
Example 2:
Based on the example 1, the DVD is playing , if a VCR is connected to the VCR 1 input (audio + video) of the receiver, press the VCR button , or press source button repeatedly until VCR is select- ed, image and sound from the VCR source will replace the DVD.
SOURCE |
|
FM/AM | TU |
SOURCE |
|
13
