Operating Your Receiver
Your Remote Control
Please be sure you have inserted the batteries into the remote control (see relevant section on page 3.) You can test it by pressing any button. If it works, the red LED will light.
1
2
13
3 4 
5
6
8 
7
9
12
11
10
* 6 channels mode is available on RT2600 only.
NOTE
The remote buttons GO BACK•DISC,
GUIDE•RDM•PTY, INFO•RDS, INPUT•SEEK &
AUDIO do not work in tuner mode.
1.ON/OFF
To turn on or off the receiver and other auxiliary compo-
nents (see page 14 “Using the Remote to ControlEN Additional Components”).
2. Source Buttons
To turn on and select various audio/ video sources.
3. CH+, CH- (Channel Buttons)
To select programmed stations (in TUNER mode).
4.VOL (Volume Buttons) To adjust the volume.
5.MUTE
To mute all audio outputs.
6. Adjustment Buttons
a. Press AUDIO button to activate the control, then DSP/EQ/SETUP key.
b. Press the left and right buttons, , the display will toggle among: SLEEP, Night mode, DIMMER, EQ and DSP.
c. When the display shows the setup you want to change, press the up and down arrow buttons beside OK button to make changes, then press OK to finalize your choice.
7. Number Buttons
To access directly a
8.MENU (Tuner Mode only)
• Press AM/FM
• To store Preset Stations. (For details, refer to "Storing and Recalling Stations in Memory" on page 17.)
9.Operation Buttons
In TUNER mode, press AM/FM on the remote.
•Press REVERSE and FORWARD keys to tune down or up the radio frequency.
•PLAY, RECORD, STOP and PAUSE keys are only for easy control of external devices that are connected to your receiver such as CD, VCR, DVD, TAPE, etc.. The remote con- trol currently operates most Thomson, RCA and GE prod- ucts, but it can be programmed to operate devices from other manufacturers (For details, refer to “Using the Remote to Control Additional Components” on page 14.
10. DIGITAL
Select the way your audio/video components are connected to the receiver (Analog, Optical, Optical 2 (RT2600 only) or Coaxial).
In TUNER mode, press to toggle between Stereo and Mono sound.
11. LEVEL
Press to adjust the volume of each speaker. Press repeatedly and the display will toggle among different channels (Left front speaker, Right front speaker, Center speaker, Left rear speaker, Right rear speaker, and Subwoofer). Press the VOL- UME up and down arrow buttons for adjustment..
12. SURR (Surround Sound Control)
Press to change the surround sound settings. The display will toggle among DOLBY DIGITAL, DOLBY PROLOGIC, DOLBY PL2 MOVIE (RT2600 only), DOLBY PL2 MUSIC (RT2600 only) , DTS (RT2600 only), STEREO.
13. LED indicator
Lights up whenever a key on the remote control is pressed.
11
