1. Introduction
Thank you for your purchase of the Ambient Weather
http://ambientweather.wikispaces.com/ws0202
2. Getting Started
Note: The power up sequence must be performed in the order shown in this section (remote rain gauge transmitter first, Display Console second).
The
2.1 Parts List
QTY | Item |
1Display Console
Frame Dimensions (LxWxH): 4.50 x 2.75 x 1.25 in
LCD Dimensions (LxW): 2.0 x 1.5”
1Rain Gauge
Dimensions (LxWxH): 4.75 x 2.75 x 3”
2.2 Recommend Tools
∙Philips screwdriver
∙Drill for mounting rain gauge
2.3 Rain Gauge Sensor Set Up
Note: To avoid permanent damage, please take note of the battery polarity before inserting the batteries.
1.Remove the rain gauge cover, as shown in Figure 1. Push in the side tabs on both sides of the rain gauge cover and lift to expose the base.
2.Remove the battery cover, as shown in Figure 2. Lift both sides of the battery cover, exposing the battery compartment.
3.Insert two AA batteries into the battery compartment , as shown in Figure 3. Replace the battery cover and the rain gauge cover.
Version 1.0 | ©Copyright 2010, Ambient LLC. All Rights Reserved. | Page 2 |
