Ambient Devices WS-0202 Remote Sensor Installation, Console Operation, Set Program Mode, Gmt

3. Remote Sensor Installation

It is recommended you mount the rain gauge sensor on a flat, well drained surface, where there is no vibration.

Use 2 screws (not included) to affix the rain gauge to a flat surface.

4. Console Operation

Note: The console has two keys for easy operation: SET key, RAIN key.

Any program mode can be exited by waiting for the 30-second time-out to take effect.

4.1 Set (Program) Mode

While in Normal Mode, press and hold the SET key for at least three seconds to enter the Set Mode. The first setting will begin flashing. You can press the SET key again to skip any step, as defined below.

1.DST (daylight savings time) ON/OFF

2.Time Zone Setting

3.12/24 hour format

4.Manual time setting (hours/minutes)

5.Calendar setting (year /month /date)

6.Temperature display units (Celsius or Fahrenheit)

7.Rainfall display units (mm or in)

In the Set mode, press the RAIN key to scroll the value. Hold the RAIN key for 3 seconds to increase rapidly.

The SET mode will return to Normal mode if no key is pressed for 30 seconds.

The following table provides times zones throughout the world. Locations in the eastern hemisphere are positive, and locations in the western hemisphere are negative.

	Hours from	Time Zone	Cities
	GMT
	-12	IDLW: International Date Line West	---
	-11	NT: Nome	Nome, AK
	-10	AHST: Alaska-Hawaii Standard	Honolulu, HI
		CAT: Central Alaska
		HST: Hawaii Standard
	-9	YST: Yukon Standard	Yukon Territory
	-8	PST: Pacific Standard	Los Angeles, CA, USA
	-7	MST: Mountain Standard	Denver, CO, USA
	-6	CST: Central Standard	Chicago, IL, USA
	-5	EST: Eastern Standard	New York, NY, USA
	-4	AST: Atlantic Standard	Caracas
	-3	---	São Paulo, Brazil
	-2	AT: Azores	Azores, Cape Verde Islands
	-1	WAT: West Africa	---
	0	GMT: Greenwich Mean	London, England
Version 1.0		©Copyright 2010, Ambient LLC. All Rights Reserved.		Page 4