Zebra Technologies 3ULQWHUV manual ULQNOHG5LEERQ

Appendixes

Troubleshooting

:ULQNOHG￿5LEERQ

&DXVH	6ROXWLRQ
The ribbon is not loaded correctly.	Load the ribbon correctly. See To load the
	ribbon, complete these steps: on page 14.
The darkness setting is incorrect.	Set the darkness to the lowest possible
	setting for good print quality.
Incorrect printhead pressure or	Set the pressure to the minimum required
balance.	for good print quality. See Printhead
	Adjustment on page 120.
The labels are not feeding correctly.	Make sure that the media guide and media
They are shifting from side to side.	supply guide touch the edge of the media.
	Adjust the ribbon strip plate.

Zebra XiIIIPlus Users Guide 129