Cisco Systems 2 manual Answer B Diagram

640 - 607

You have just finished configuring a router. The changes have been made successfully and everything is working correctly. You then save your changes and reboot the router. None of your changes are active after reboot. However, when you look at the contents of startup-config, your changes are there.

Which of the following indicates the source of the problem?

A.Hardware failure NMVRAM prevents the router from loading the configuration.

B.Startup-config in flash is corrupt and cannot be analyzed.

C.Router configuration register set to bypass startup configuration.

D.Startup-config in NVRAM is corrupt and cannot be analyzed

Answer: C

Q. 272

What does IGRP use to determine the best path to a destination?

A.The highest metric value.

B.The lowest composite metric value.

C.The lowest hop-count and delay.

D.The highest bandwidth and reliability

E.The lowest administrative distance.

Answer: B

Q.273 Diagram

Leading the way in IT testing and certification tools, www.testking.com

- 157 -