640 - 607
Leading the way in IT testing and certification tools, www.testking.com
- 48 -
Steve McQuerry. Interconnecting Cisco Network Devices. (Cisco Press: 2000) pages 162-163.
Q. 67
In order to enable RIP which two tasks need to be performed? (Choose two)
A. Specify the routing protocol.
B. Configure static Rip routes.
C. Specify directly connected subnets.
D. Specify directly connected networks.
Answer: A, D
Explanation: In enable a router with RIP it takes two basic steps: select the routing protocol and identify the
networks that the router is directly connected to. These steps are achieved with the commands router rip and
network.
Incorrect Answers:
B is incorrect; there is no such thing as a static RIP route.
C is incorrect; with RIP you specify the directly connected networks, not the directly subnets.
Steve McQuerry. Interconnecting Cisco Network Devices. (Cisco Press: 2000) pages 278-279.
Q. 68
A router on one side of a PPP link uses t he host name RT R1 and the pas sword CORP1-PW D. Which
configuration line on RTR1 enables the connection between RTR1 and other router named RTR2?
A. Username RTR2 password CORP1-PWD
B. Username RTR1 password CORP1-PWD
C. Username RTR2 password CORP2-PWD
D. Username RTR1 password CORP2-PWD
Answer: A
Explanation: We specify the username of the peer router with the password of the host router.
Incorrect Answers:
B, C and D are incorrect; the username needs to be the peer router, and the password needs to be the password
of the hosting router.