Cisco Systems 2 manual Answer a

640 - 607

Which command specifies a second sub interface on serial interface 0?

A.Interface s0.2 point-to-point

B.Interface 2s0 point-to-point

C.Subinterface 2s 0 point-to-point

D.Interface s0 sub2 point-to-point

E.Interface s0.1 point-to-point sub2

Answer: A

Explanation: The proper syntax for configuring a second subinterface is interface 0.2 point-to-point. Option A is the closest to this command. The syntax after the command interface is serial interface number (0 in this case).subinterface number (2 in this case) and this followed by the either multipoint or point-to-point.

Incorrect Answers:

B is incorrect; remember that the syntax is suppose to be number.subinterface number and that there is suppose to be two hyphens in point -to-point.

C is incorrect; the command is interface not subinterface.

D is incorrect; the two numbers are broken by a period and not the word sub.

E is incorrect; this is not the proper syntax. Remember the interface and subinterface are identified by number.subintreface number.

Steve McQuerry. Interconnecting Cisco Network Devices. (Cisco Press: 2000) pages 428-429.

Leading the way in IT testing and certification tools, www.testking.com

- 72 -