640 - 607
Explanation: Each interface that has the IP protocol, will show all IP addresses that were configured on that interface, with subnet masks.
Incorrect Answers:
A is incorrect; this only shows the IP to host mappings, like the mapping of a HOSTS table. C, D, E, and F are incorrect; these options do not provide this information.
Steve McQuerry. Interconnecting Cisco Network Devices. (Cisco Press: 2000) pages
Q. 156
What is the
A.IP
B.UDP
C.TCP
D.DNS
E.OSPF
Answer: C
Explanation: TCP is a
Incorrect Answers:
A is incorrect; IP is a connectionless protocol.
B is incorrect; UDP is a connectionless protocol.
D is incorrect; DNS is a service, not a protocol.
E is incorrect; OSPF is a routing protocol.
Steve McQuerry. Interconnecting Cisco Network Devices. (Cisco Press: 2000) pages
Q. 157
What does the term ‘Base’ refer to in 100BaseT?
A.Cabling type
B.Signaling type
C.100 mode type
D.Spectrum used
E.Speed category
Answer: B
Leading the way in IT testing and certification tools, www.testking.com
- 96 -