640 - 607
Incorrect Answers:
C is incorrect; hierarchical areas make for a more efficient use of address but will not prevent loops.
D is incorrect; link State is a different method than Vector Routing, they are not combined for loop elimination.
Steve McQuerry. Interconnecting Cisco Network Devices. (Cisco Press: 2000) pages
Q. 178
Which command should you use to configure a router so that it can become a TFTP host for router system image that is run in Flash?
A.Copy flash tftp
B.Config tftp server
C.Write network <router name>
D.
E.Setup server tftp <systemname>
Answer: A
Explanation: This is a poorly written question. When interrupted this question is asking how can a tftp server can use use a routers IOS image that is stored in the flash memory. The answer is use the command copy flash tftp.
B is incorrect; this is not a valid command.
C is incorrect; this is not a valid command.
D is incorrect; this is not a valid command.
Q. 179
Which commands loads a new version of Cisco IOS into the router?
A.Copy flash ftp
B.Copy ftp flash
C.Copy flash tftp
D.Copy tftp flash
Answer: D
Explanation: Whenever you need to load a new copy of the IOS onto the router (because the old one is damaged or you are upgrading you can download a copy of the new image from the tftp server. The proper command is copy tftp flash.
Leading the way in IT testing and certification tools, www.testking.com