640 - 607

A.show ip interface

B.show cdb neighbors

C.show cdp neighbors detail

D.show ip route

E.show ip link status

F.telnet

Answer: C

Explanation: The show cdp neighbors detail command displays information about neighboring devices. The information displayed includes Layer 3 protocol information and Neighbor Device ID. The show cdp entry command also results in the same information as the show cdp neighbors detail command.

Incorrect Answers:

A is incorrect; the show ip interface command display IP interface information and indicates whether any access list are set for a specific interface.

B is incorrect; the show cdp neighbors command displays such information as Neighbor Device ID and Local Interface but nothing on Layer 3 protocols.

D is incorrect; the show ip route command displays the contents of the ip routing table. E is incorrect; this is not a valid command.

F is incorrect; the telnet command is used to establish a telnet command.

Steve McQuerry. Interconnecting Cisco Network Devices. (Cisco Press: 2000) pages 116-119, 324-324, 280, and 120.

Q. 44

Which command is used to display the placement and direction of an IP access control list on a router?

A.show access-list

B.show ip route

C.show ip interface

D.show interface

E.show interface list

Answer: C

Explanation: The show ip interface command display IP interface information and indicates whether any access list are set for a specific interface and it also indicates if the access list is inbound or outbound.

Incorrect Answers:

A is incorrect; this is not a valid command.

Leading the way in IT testing and certification tools, www.testking.com

- 34 -

Page 34
Image 34
Cisco Systems 2 manual Is incorrect this is not a valid command