Cisco Systems 2 manual What is the most common mail to device?

640 - 607

Steve McQuerry. Interconnecting Cisco Network Devices. (Cisco Press: 2000) pages 413-414.

Q. 165

What is the most common mail to device?

A.Hub

B.Router

C.Repeater

D.Switch

Answer: D

Q. 166

While you are preparing the initial configuration of your router and enable IP you find that you need to use a telnet session to check for a network address parameter. Your telnet logging and your virtual transmission session on the other device are successful. What is the default that you must enter to suspend your Telnet session and return to the original router?

A.Suspend

B.The command exit

C.CTRL – ESC followed by x

D.CTRL – ALT – DEL followed b ESC

E.CTRL- Shift-6 followed by x

Answer: E

Explanation: To suspend a Telnet session and escape from the remote target system back to your local switch or router, press the keys Ctrl-Shift-6 at the same time, release the key sequence, and then press the character x.

Incorrect Answers:

A, B, C, and D are incorrect; these are not the proper key combinations to suspend a Telnet session.

Steve McQuerry. Interconnecting Cisco Network Devices. (Cisco Press: 2000) pages 122-123.

Q. 167

Which ex command displays system configuration information, software version and the names and sources of configuration files and boot images on a router?

A. show boot

Leading the way in IT testing and certification tools, www.testking.com

- 102 -