Cisco Systems 2 manual Which command retrieves the configuration file from NVRAM?, Answer C

640 - 607

E is incorrect; this is not a valid command combination.

Steve McQuerry. Interconnecting Cisco Network Devices. (Cisco Press: 2000) pages 138-139.

Q. 107

Which command retrieves the configuration file from NVRAM?

A.Config NVRAM

B.Copy NVRAM running-config

C.Copy startup-config running-config

D.Copy running-config startup-config

Answer: C

Explanation: To copy the IOS image in the NVRAM to the RAM the copy startup-config running-config command is used.

Incorrect Answers:

A is incorrect; this is not a valid command combination. B is incorrect; this is not a valid command combination.

D is incorrect; this actually copies the IOS image from the RAM to the NVRAM which is the exact opposite of what the question asked.

Steve McQuerry. Interconnecting Cisco Network Devices. (Cisco Press: 2000) page 133.

Q. 108

Which command allows the user to see a system message when logging into a router?

A.Banner MOTD

B.Message MOTD

C.Banner Message

D.Message Banner

Answer: A

Explanation: In order for a user to see a message when the log into a router a message of the day will need to be employed. The command to do this is banner motd.

Incorrect Answers:

B is incorrect; the command is banner not message.

C is incorrect; the proper parameter is motd not message.

D is incorrect; this is an invalid command.

Leading the way in IT testing and certification tools, www.testking.com

- 69 -