Cisco Systems 2 manual Answer a

640 - 607

Steve McQuerry. Interconnecting Cisco Network Devices. (Cisco Press: 2000) pages 304-305.

Q. 97

Which router command allows you to determine if an IP access list is enabled on a particular interface?

A.Router# show ip interface

B.Router> show access-list

C.Router# show ip access-list

D.Router> show interface ip access-list

Answer: A

Explanation: The show ip interface command displays IP interface information and indicates whether any access lists are set for a specific interface.

Incorrect Answers:

B is incorrect; the show access-lists command must be given in the privileged EXUC mode.

C is incorrect; even if the proper command was used the end result would the displaying of all IP access lists running in the router, not for a particular interface.

D is incorrect; this is not a valid command.

Steve McQuerry. Interconnecting Cisco Network Devices. (Cisco Press: 2000) pages 324-325.

Q. 98

Which router command allows you to view the entire contents of all access lists?

A.Router# show interface

B.Router> show IP interface

C.Router# show access-list

D.Router> show all access list

Answer: C

Explanation: The show access-lists command will display the contents of all access lists. C is the closest to this command.

Incorrect Answers:

A is incorrect; only access lists bound to that interface would be displayed

B is incorrect; show ip interface command must be given in the privilege EXEC mode. D is incorrect; this is not a valid command.

Leading the way in IT testing and certification tools, www.testking.com

- 64 -