JAMO GMRS9010-2CH LED Flashlight Button, Power On/Off/Keylock 13 Button, Adjusting the Volume 10

GMRS9010-2CH OPERATIONAL MODES

WEATHER BAND

GMRS/FRS BAND

CHANNEL

SELECT

WEATHER BAND

SELECT

NOTE: 1. To switch between GMRS/FRS and Weather Band modes, press and hold the Mode but- ton for 3 seconds. Refer to the appropriate section of this manual for detailed operating instructions for each mode.

2.To enter the VOX mode, press and hold the SCAN button for 3 seconds.

CHANNEL

SELECT

CTCSS

SELECT

POWER	(GMRS Channels
SELECT	Only)

VOX LEVEL

SELECT

DUAL

WATCH

BUTTON

BEEP

ROGER

BEEP

CALL

SELECT

Controls:

LED Flashlight Button (16)

Press this button on the right side of the Transceiver to light the white LED (15) on top of the unit, thereby activating the built-in flashlight function.

Power On/Off/Keylock (13) Button

Momentarily press (less than 1 second) the power on/off button ( ). You will hear a confirming melody to indicate the unit is on. Momentarily press the on/off button again to turn the unit off. When the unit is on and the button is pressed for more than 1 second, the keylock icon ( ) will appear to confirm the MODE, SCAN and channel up/down buttons have been disabled.

Adjusting the Volume (10, 11)

With the unit powered on, press the Up Channel/Volume button ( ) to increase volume and the Down Channel/Volume button ( ) to decrease

128-7033A

10 of 28

10