To adjust the duration of the phone call, Alert beeps | BT 65

PaperJet 65 user guide – Edition 3 – 8.10.01

To adjust the duration of the phone call	To change the remote start code
alert beeps
	Function

When your PaperJet 65 is set to PHONE/FAX RX mode it automatically answers all calls. If it is a phone call, it is set to beep for 20 seconds to alert you to pick up the handset. You can adjust the duration of these beeps.

Press until the display shows INSTALLATION

Display shows TEL.LINE SET-UP

Press until the display shows FAX/TEL

TIMER:20

Press to switch between the options of 15, 20, 30 and 40 seconds.

Press to confirm the option displayed.

To return to standby.

Receiving a fax call via an extension phone (Remote Start)

If you answer a call on an extension phone connected to the same line as your PaperJet 65 and you hear fax tones, you can switch your PaperJet 65 into fax receive mode by dialling ✱ 5. This is like pressing the Start button.

When you hear your PaperJet 65 respond with its own fax tones, hang up the extension phone.

You can replace the 5 of this code with any digit from 0-9.

FPress until the display shows INSTALLATION

		Press Start until the display shows
	Start	TYPE CODE *5
	0-9	Enter the new digit you want after the ✱.
	0-9	Note that the ✱ cannot be changed.
		Note that the ✱ cannot be changed.

Press to confirm.

Start

To return to standby.

Stop

To switch remote start off/on

Function

FPress until the display shows INSTALLATION

Press until the display shows REMOTE

Start	START: ON
	Press to change from ON to OFF.
Start	Press to confirm the setting.
Start
	Press to return to standby.
Stop

40

Image 42

BT 65, Colour Printer manual To adjust the duration of the phone call, Alert beeps, To switch remote start off/on

Contents

PaperJet Page PaperJet 65 user guide Edition 3 At a glance Document feeder width guides PaperJet Page Key features To print from your PC This guide Unpacking your PaperJet Using the PC print facilityIntroduction For your records Safety information Connect the handset Setting upPlan the location of your PaperJet Fit the paper support Connect the mains power Load paper Automatic RX Check Print Head If necessary, check the paper size setting Install the starter print cartridge Automatic print quality test Check Print OUT = Exit 0 = Repeat Display shows Format DD/MM/YY Set the date and timeEnter your name and fax number Display shows TEL. Line SET-UP To set the position of your fax header Display shows Various SettingsConnecting to your PC Inside Using your PaperJet Setting the contrast and resolutionSending faxes To send a fax To select the default resolution settingTo display Date and Time To display Various Settings To dial and hear the progress of your fax call To dial using the handset To switch document retransmission on/offTo redial the last number Hhmm To send a fax at a pre-set time delayed faxingTo change the details of a pre-set fax Automatic RX TX AT To broadcast a document To change, re-send or cancel a stored documentSETTING? To fax from memory Receiving faxes Using the one-touch memories ANOTHER? YESTo store a one touch entry Using the speed-dial memories To send a one-touch faxDial To send a speed dial fax FAX Call Code orTo edit or delete a speed dial entry Reports and lists Report Delay List OFFTo request immediate print-outs REP on To print the set-up list To print the configuration, speed dial and one-touch listsMaking and receiving phone calls To make a phone call To make a speed dial call To put a caller on holdTEL Call Code or To copy a document Copying documentsTo stop copying 100% Text Normal Record OGM # Using the answering machineTo record your OGMs message and forwarding announcement Or Record OGM # Or REC.FORW.ANNOUNC To play back OGM 1 or OGM2 Adjusting the volumeTo switch the answering machine on/off To record a memo To delete individual messages To play your messagesTo skip forwards or backwards through your messages To delete all messages that have been played back To forward new messages Forwarding OFFType TEL. Number Recording capacity To set Announce OnlyTo set the maximum message length To switch Call screening on/off Week To lock/unlock the answering machine Unlock Remote access To change your Remote access codeTo operate the answering machine from another phone To switch toll saver on/off To TAD/FAX RX mode Copy High Quality Additional featuresTo set the print quality High Qual Display shows TEL.LINE SET-UP To adjust the ringer volumeTo receive a document longer than the paper size High To adjust the duration of the phone call To switch remote start off/onAlert beeps To adjust the volume of the buzzer To switch the fax tones on and offTo adjust the loudspeaker volume To adjust the speed a fax is sent at To poll a document from another fax machine To switch ECM mode on/offPolling Number To set a document for polling by another fax machine To cancel pollingTo display Cancel SETTING? To change a polling time and number Caller Display To change the silence detection timeLapse Ring OFF Call Sign Distinctive ringingTo learn the ring melody Pattern Number Connecting to a switchboardTo set the dialling mode and access EXT. Line Prefix Using the External button To switch dialling mode during a call Help Your machine does not receive faxes automatically You cannot print faxes or copy documentsYour machine prints out completely blank copies Error codes Receiver does not Answer Error messages Beeps Memory capacity Changing the printhead/cartridge assembly MaintenanceCleaning your PaperJet Changing the printhead/cartridge Changing the ink cartridge To clean the print head and nozzles Manually cleaning the printhead contactsNEW Head OFF Cleaning the print head pad Cleaning the optical scanner Press Removing jammed pages Dimensions Technical information TTE Index PaperJet 65 user guide Edition 3 PaperJet 65 user guide Edition 3 PaperJet 65 user guide Edition 3 Offices worldwide