PaperJet 65 user guide – Edition 3 – 8.10.01

To set Announce Only

Recording capacity

You can set your answering machine to Announce Only where callers will hear your OGM #1 but your machine will not record their messages. This enables you to leave an information announcement. You will still be able to receive faxes.

When the machine is in standby, press the Function button until the display shows TAD

SET UP

Press the Start button.

Press the Function button until the display shows ANNOUNCE ONLY

Press the Start button. Display shows

ANNOUNCE ONLY:OFF

Press the < > buttons to display ON

Press the Start button to confirm, your OGM 1 is replayed.

The display now shows LIFT HANDSET.

PRESS / ! /

You can now record a new OGM 1 if required.

Lift the handset.

Press the Start button to begin recording. Replace handset to end recording.

Press the Stop button to return to standby.

Your answering machine can record up to 50 messages and memos, to a total recording time of 18 minutes including OGMs and announcements. You can set the maximum length of each message at 30 or 60 seconds. (It is pre-set to 30 seconds).

To set the maximum message length

When the machine is in standby:

Press the Function button until the display shows TAD SET UP

Press the Start button.

Press the Function button until the display shows ICM REC.TIME

Press the Start button.

Display shows: REC. TIME:30 SECS

Press the < > buttons to switch between

60 SECS/30 SECS

Press the Start button to confirm the option displayed.

Press the Stop button to return to standby

33

Page 35
Image 35
BT Colour Printer, 65 manual Recording capacity, To set Announce Only, To set the maximum message length