Cycle Guide – Automatic Cycles

Settings and options shown in bold are default settings for that cycle.

If settings are changed, the new settings will be remembered. If there is a power failure, settings will return to the default. Not all settings and options are available on each cycle.

Use Automatic Cycles for better fabric care and energy savings

The dryer senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level. Use the NORMAL dryness level to provide optimal energy savings.

 

 

 

Drying

Dryness

Default

 

 

 

Items to dry:

Cycle:

Temperature:

Level:

Time:

Cycle Details:

 

Heavyweight items

Heavy

High

More

45

Offers stepped drying starting with High heat followed

 

 

 

 

such as towels or

Duty

 

Normal

 

by Medium heat for enhanced fabric care and energy

 

 

heavy work clothes

 

 

Less

 

savings.

 

 

 

 

 

 

 

 

 

 

Work clothes, casual

Normal

Medium

More

38

Uses Medium heat to dry large loads of mixed fabrics

 

 

wear, mixed cottons,

 

 

Normal

 

and items. Normal is the preferred energy cycle.

 

 

sheets, corduroys

 

 

Less

 

 

 

 

 

 

 

 

 

 

 

 

Undergarments,

Delicates

Low

More

28

Uses Low heat to gently dry delicate items.

 

 

blouses, lingerie,

 

 

Normal

 

 

 

 

performance wear

 

 

Less

 

 

 

 

 

 

 

 

 

 

 

Cycle Guide – Manual Cycles

Settings and options shown in bold are default settings for that cycle.

If settings are changed, the new settings will be remembered (except on Quick Dry). If there is a power failure, settings will return to the default.

Not all settings and options are available on each cycle.

Selecting the Drying Temperature

A High heat setting may be used for drying heavyweight items such as towels and work clothes.

A Low to Medium heat setting may be used for drying medium-weight items such as sheets, blouses, dresses, underwear, permanent press fabrics, and some knits.

Use a no heat (air dry) setting for foam, rubber, plastic, or heat-sensitive fabrics. Line dry bonded or laminated fabrics.

NOTE: If you have questions about drying temperatures for various loads, refer to the care label directions.

 

 

Drying

Default

 

Items to dry:

Cycle:

Temperature:

Time:

Cycle Details:

 

 

High

26

 

Small loads and

Quick Dry

For small loads of 3–4 items.

sportswear

 

Medium

 

 

 

 

Low

 

 

 

 

Air Only

 

 

 

 

 

 

 

Any load

Time Dry

High

40

Use to dry items to a damp level for items that do not require an entire

NOTE: Select Air

 

Medium

 

drying cycle. Select a drying temperature based on the type of fabrics in

Only to dry foam,

 

Low

 

your load. If you are unsure of the temperature to select for a load, select

rubber, plastic,

 

Air Only

 

the lower setting rather than the higher setting.

or heat-sensitive

 

 

 

 

fabrics.

 

 

 

 

 

 

 

 

 

Load Size Recommendations

For best results, follow the wet load size recommendations noted for each cycle.

Small load: Fill the dryer drum with 3–4 items, not more than 1/4 full.

Medium load: Fill the dryer drum up to about 1/2 full.

Large load: Fill the dryer drum up to about 3/4 full. Do not pack tightly. Items need to tumble freely.

7

Page 7
Image 7
Amana electronic dryer Cycle Guide Automatic Cycles, Cycle Guide Manual Cycles, Drying Dryness Default Items to dry Cycle