Black Box 3600 MODEM manual High Security

Security

Set Password $S=x

The $S=x command sets an empty password location to x. This command only applies when no password or only one is stored in memory. It cannot be used to change a password.

Changing a Password $C=x, y

The $C=x,y command changes either password where x represents the old password and y is new one.

Deleting a Password $C=x, -

The $C=x,- command deletes password x from memory. Security is automatically disabled if the last password is deleted.

Security Reset $DR

This command resets security to its initial state (off with no passwords stored). The option is not available in remote configuration.

Disabling Security $D=x

The $D=x command disables security where x is either password.

Security Status $D?, $E?

The $D? or $E? command displays the current status of security (on or off).

Enabling Security $E=x

The $E=x command enables security where x is either password.

High Security

Compatibility

An originating modem does not require security capabilities to connect with a secured Modem 3600. Access to the Modem 3600 host is gained by following the appropriate logon procedure as described in following text. All security operations are controlled by the secured Modem 3600.

Capacity

The modem stores in nonvolatile memory the password, security level, callback phone number, and status information for 50 users.

8-4 Modem 3600