Black Box 3600 MODEM manual Command Reg Description

Hardware Options

Command	Page	S-Reg	Description
\J	page 6-	S72	Disable slaved DTE/DCE speed
	5		(constant speed DTE on)
\J1		S72	Enable slaved DTE/DCE speed
			(constant speed DTE off)
\J2		--	Enable 230.4 kbps DTE speed
\J3		--	Disable 230.4 kbps DTE speed

Note

The 230.4 kbps DTE speed is available, but the DTE will not autobaud to 230.4 kbps. With the modem set for 115.2 kbps, enter AT\J2 to enable the speed, and reset the DTE for 230.4 kbps. When the modem is set for 230.4 kbps, enter AT\J3 to disable it if needed. Reset the DTE for 115.2 kbps.

\Kn	page 6-	S59	Selects action when encountering a
	9		break
\K		S59	Break option 0
\K1		S59	Break option 1
\K2		S59	Break option 2
\K3		S59	Break option 3
\K4		S59	Break option 4
\K5		S59	Break option 5
\M	page 6-	S70	V.42 fast detect data sequence disabled
	5
\M1		S70	V.42 fast detect data sequence enabled
\N	page 6-	S70	Normal mode
	6
\N1		S70	Direct mode
\N2	page 6-	S70	MNP only
	6
\N3		S70	MNP or normal
\N4		S70	LAPM only
\N5		S70	LAPM with normal fallback
\N6		S70	LAPM with MNP fallback
\N7		S70	LAPM with MNP and normal fallback

† cannot be executed from remote configuration mode

E-10 Modem 3600