Black Box 3600 MODEM manual Verify User Information $In, $IBn, Request Superuser Privilege $S=pw

Security

Verify User Information $In, $IBn

Security level and callback number can be displayed using either the $In or $IBn command. To display the assigned security level and callback number for a single user enter

AT$In

where n is the user number. A regular user can only check his own information. A user with superuser privileges can check any user's information.

A user with superuser privileges can also display the assigned security level and callback number for each valid user within a block of ten consecutive user numbers by entering:

AT$IBn

where n is the first user number.

Request Superuser Privilege $S=pw

Once logged on as a user, superuser privilege can be requested by entering the $S=pw command, where pw is the superuser password.

When the correct password has been entered, the Modem 3600 responds with

SUPERUSER STATUS

OK

Local Logon Command $n=pw

Enter the $n=pw command to logon locally to the secure Modem 3600 where n is the user number and pw is the password.

Local Logoff Command $$

To logoff after a local session enter

AT$$

Remote Logon Procedure $n=pw

The remote logon procedure is required to access a secure Modem 3600. When calling into the secure Modem 3600 from a remote location the user is prompted to enter a password. The password must be entered as

$n=pw

where n is the user number and pw is the user’s password.

Modem 3600 8-11