English
9. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
| Error Display | Cause | Measure |
CD/MP3/WMA/AAC | ERROR 2 | A CD is caught inside the CD | This is a failure of CD deck’s mechanism and consult |
| not play. | your store of purchase. | |
|
| deck and is not ejected. | |
| ERROR 3 | A CD cannot be played due | Replace with a |
|
| to scratches, etc. |
|
| ERROR 6 | A CD is loaded | Eject the disc then reload it properly. |
|
| inside the CD deck and does |
|
|
|
|
|
| ERROR 2 | A CD inside the CD changer | This is a failure of CD changer’s mechanism and |
changer |
| is not loaded. | consult your store of purchase. |
|
|
| |
ERROR 3 | scratches, etc. | Replace with a | |
| A CD inside the CD changer | ||
|
| cannot be played due to |
|
CD |
|
|
|
ERROR 6 | A CD inside the CD changer | Eject the disc then reload it properly. | |
|
| cannot be played because it |
|
|
| is loaded |
|
| ERROR 2 | A DISC inside the DVD | This is a failure of DVD mechanism and consult your |
|
| changer cannot be played. | store of purchase. |
|
|
|
|
changer | ERROR 3 | A DISC cannot be played due | Retry or replace with a |
| to scratches, etc. | disc. | |
|
| ||
|
|
|
|
| ERROR 6 | A DISC inside the DVD | Eject the disc then reload it properly. |
DVD |
| changer cannot be played |
|
| down. |
| |
|
| because it is loaded upside- |
|
|
|
|
|
| ERROR P | Parental level error | Set the correct Parental level. |
|
|
|
|
| ERROR R | Region code error | Eject the disc and replace correct region code disc. |
| ERROR 1 | A communication error | Disconnect the iPod, then connect it again. |
iPod |
| occurs between the iPod and |
|
| the iPod CeNET Controller. |
| |
|
|
| |
|
|
|
|
| NO IPOD | There is no iPod connected. | Please connect the iPod. |
| ERROR 1 | Device mechanism is | The unit’s mechanism may be damaged. Consult |
|
| damaged. | your dealer. |
|
|
|
|
USB | NO FILE | USB memory device contains | Insert USB memory device containing audio files. |
| no audio files. |
| |
|
|
| |
|
|
|
|
| DSP ERROR | USB connector is short- | Disconnect USB memory device, then hold [SRC] |
|
| circuited or USB memory | button depressed to turn power OFF. Then press |
|
| device is overloaded. | [SRC] button once again to turn power ON. |
|
|
|
|
If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and consult your store of purchase.
42 DXZ775USB
