USB Operations
Connecting a USB memory device | To stop play |
1.Connect the USB memory device to the USB cable.
Playback will begin from the first file recorded on the USB memory device.
∗If the USB memory device is not recognized, press the [SRC] button to switch the source to the device.
∗Always insert the USB memory device fully into the connector. Incomplete connections may cause the USB memory device not to be recognized.
∗Depending on the number of tracks recorded, some amount of time may be required until all tracks are read into the unit.
∗The order in which tracks are recorded may differ depending on the USB memory device connected (the actual playback order may not be the same as that indicated on your computer’s display).
1.Press the [SRC] button and switch the function to a source other than the USB memory.
CAUTION
Do not remove the USB memory device when the USB mode is selected, since it may result in loss or damage to data on the USB memory device.
Always backup and save important data on your computer.
2.Remove the USB memory device from the USB cable.
English
To listen to tracks on a connected
USB memory device
1.Press the [SRC] button to switch the source. When USB memory device is selected, playback will begin from the location at which playback was previously stopped.
∗When a USB memory device is connected the USB mode will be displayed.
∗When a USB memory device is disconnected and then reconnected, playback will begin from the beginning of the USB memory device.
DXZ775USB 31
