Basic Operations
Turning on/off the power | Switching the display |
Note:
•Be careful about using this unit for a long time without running the engine. If you drain the car’s battery too far, you may not be able to start the engine and this can reduce the service life of the battery.
1.Press the [SRC] button.
The mode that was previous active is displayed.
2.Press and hold the [SRC] button for 1 second or longer to turn off the power for the unit.
Press and hold the [TITLE] button for 1 second or longer to select the desired display.
●When the power is turned on
1.Each time you press and hold the [TITLE] button for 1 second or longer, the display switches in the following order:
Action display ➜ Title display ➜ Clock time
display ➜ Action display...
●When the power is turned off
1.Each time you press the [TITLE] button, the clock time appears or disappears in the display.
English
Selecting a mode
1.Press the [SRC] button to change the operation mode.
2.Each time you press the [SRC] button, the operation mode changes in the following order:
Radio ➜ (Satellite radio) ➜ CD/MP3/WMA/ AAC ➜ USB ➜ (iPod BB) ➜ (CD changer) ➜ (DVD changer) ➜ (TV) ➜ AUX ➜ Radio...
∗External equipment not connected with CeNET is not displayed.
Adjusting the volume
1.Push the [VOL] button upward or downward to adjust the volume.
∗The volume level is from 0 (minimum) to 33 (maximum).
Mute
Use this function to turn off the sound immediately.
1.Press the [] button.
The sound turns off and “MUTE” blinks in the display.
2.Press the [] button again to cancel the mute mode.
DXZ775USB 11