Clarion iDXZ775USB Adjusting Sound Setting, Mode, To change sound setting mode, English

English

Basic Operations

Adjusting Sound Setting	2-1.	Select “PRESET”.
Mode	3-1.	Press the [	] button.
	3-2.	Push the [SEEK PANEL] leftward or
		rightward and select from:

To change sound setting mode

1.Press and hold the [ ] button for 2 seconds or longer and select the sound setting mode to adjust.

2.Push the [SEEK PANEL] leftward or rightward to select the “item name”.

When speaker system is “NORMAL”:

“PRESET” ↔ “ALL SEAT” ↔ “T ALIGNMENT” ↔ “P.EQ ON/OFF” ↔ “EQ SELECT” ↔ “SUB WOOFER” ↔ “PRESET”...

When speaker system is “3WAY”:

“PRESET” ↔ “ALL SEAT” ↔ “X-OVER”

↔“T ALIGNMENT” ↔ “SPEAKER GAIN”

↔“P.EQ ON/OFF” ↔ “EQ SELECT” ↔

“SUB WOOFER” ↔ “PRESET”...

When speaker system is “2WAY”:

“PRESET” ↔ “ALL SEAT” ↔ “X-OVER”

↔“T ALIGNMENT” ↔ “SPEAKER GAIN”

↔“P.EQ ON/OFF” ↔ “EQ SELECT” ↔

“PRESET”...

∗In the case of item names appearing with

the “ENT” suffix, after the item name, the

[ ] button must be pressed to display the setting value.

∗After completing settings, press the [ ] button to return to the previous mode.

“LOAD” ↔ “SAVE” ↔ “INITIAL” ↔

“LOAD”...

3-3. Push the [P.CH] button upward or downward to adjust the load and the save.

LOAD : “SELECTING 1” to “SELECTING 3” (The factory default setting is “SELECTING 1”)

SAVE : “1” to “3” (The factory default setting is “1”)

3-4. Press and hold the [	] button to
store into memory.

(LOAD: Press and hold the button for 1 second or longer.

SAVE: Press and hold the button for 2 seconds or longer.)

●Setting the all seat

The setting of “T ALIGNMENT” and “SPEAKER GAIN” temporarily returns to the factory default setting. When the setting that is adjusted for the driver's seat returns to the factory default setting, a sound suitable for all seats is provided.

∗The factory default setting is “OFF”.

2-1. Select “ALL SEAT”.

3-1. Push the [P.CH] button upward or downward to select “ON” or “OFF”.

●Setting the preset setting

This function allows you to recall, save or initialize the sound settings.

If your speaker system is “3WAY” or “2WAY”, you can store and recall up to three adjustments you have made to “P.EQ ON/OFF”, “X-OVER”, “T ALIGNMENT”, “SPEAKER GAIN”.

LOAD: To recall the stored sound settings.

SAVE: To save the sound settings.

INITIAL: To initialize the sound settings.

The load and the save can be adjusted as follows.

16 DXZ775USB